Received 14/02/2024
DOI: 10.35556/idr-2024-3(108)64-67
Manufacturing of temporary artificial crowns using 3D printing
Shnider S.D.
ChUZ Dental Clinic “Clinical Hospital “RZD-Medicine”
454091, Russia, Chelyabinsk, Svobody St., 86
E-mail address: shnaider.semen@gmail.com
Summary
The article discusses current issues of introducing digital technologies in orthopedic dentistry and the feasibility of using them to improve the quality of dental care and reduce labor costs.
Object: to develop guidelines for the use of temporary composite crowns using 3D printing, to identify the advantages of this method compared to traditional methods of manufacturing orthopedic dental structures of this type.
Material and methods. Based on the author’s clinical experience in the dental clinic of the Clinical Hospital “RZhD-Medicine”, Chelyabinsk, 72 clinical cases were analyzed (patients aged 18 to 55 years, 50% men, 50% women), of which in 36 cases composite crowns were made for patients using 3D printing in accordance with patent No. 2805832, and in 36 cases – in the traditional way.
Results and discussion. Recommendations are given for the practical application of the method proposed by the author for the production of temporary composite crowns using 3D printing, and the advantages of this method compared to traditional crown production are shown.
Conclusions. It is concluded that the use of the technology for producing temporary composite crowns using 3D printing improves the quality of services and increases economic efficiency: the process of taking impressions occurs without an impression mass, physical labor is facilitated, the production time is reduced, and therefore the number of visits, the amount of consumables is reduced; the accuracy of 3D structures for temporary use increases, there is no release of residual monomer onto the oral mucosa, which is typical for the production of temporary structures from acrylic plastics.
Keywords: digital dentistry, intraoral scanning, 3D printer, orthopedics, composite crowns of temporary use.
For citation: Shnider S.D. Manufacturing of temporary artificial crowns using 3D printing. Stomatology for All / Int. Dental Review. 2024; no.3(108): 64-67 (in Russian). doi: 10.35556/idr-2024-3(108)64-67
References
1. Abolmasov N.G. Abolmasov N.N. Serdyukov M.S. Orthopedic dentistry. Moscow, 2018; 165 p. (in Russian).
2. Akbutin E.A., Doromeychuk T.N. 3D printer: the history of the creation of the machine of the future. A young scientist. 2015; no. 1: 97–98 (in Russian).
3. Vokulova Yu.A., Zhulev E.N. Evaluation of the manufacturing time of dental prostheses created using traditional and digital technologies. Problems of dentistry. 2020. 16, no. 3: 131–138 (in Russian).
4. Vokulova Y.A., Zhulev E.N. Comparative evaluation of the manufacturing time of arch prosthesis frames created using traditional and digital technologies. Stomatology for All / Int. Dental Review. 2021, no. 2(95): 4–7 (in Russian). doi: 10.35556/idr-2021-2(95)4-7
5. Kotelnikov G.P., Kolsanov A.V., Nikolaenko A.N., Popov N.V., Ivanov V.V., Shcherbovskikh A.E., et al. Application of 3D modeling and additive technologies in personalized medicine. Bone and soft tissue sarcomas, tumors of the skin. 2017; no. 1: 20–26 (in Russian).
6. Studenikin R.V., Mamedov A.A. The full cycle of digitalization and automation in dental practice. Stomatology for All / Int. Dental Review. 2021, no. 4(97): 46–52 (in Russian). doi: 10.35556/idr-2021-4(97)46-52
7. Rogozhnikov A.G. Innovative technologies in the daily practice of orthopedic dentistry. Dentistry of the Greater Urals at the turn of the century: to the 100th anniversary of the Perm State Medical University named after Academician E.A. Wagner. Perm, 2015; p. 47–54 (in Russian).
8. Ryakhovsky A.H., Polyakova M.V. Computer–aided design of artificial dentitions of complete removable dentures. Dentistry. 2011; no. 2: 65–70 (in Russian).
9. Ertesyan A.R., Sadykov M.I., Nesterov A.M. The influence of the direction of 3D printing on the accuracy of manufacturing complete removable plate prostheses using stereolithography technology. International Scientific Research Journal. 2021; no. 1 (103): 66–72 (in Russian).
10. Ertesyan A.R., Sadykov M.I., Nesterov A.M. Review of 3D printing technologies in dentistry. Medical and pharmaceutical journal “PULSE”. 2020; 22, no. 10: 15–18 (in Russian).
11. Yumashev A.V. Options for using 3D scanning in orthopedic dentistry. Bulletin of new medical technologies. 2015; no. 1: 2–6 (in Russian).
12. Bunek S.S., et al. The Evolving Impressions of Digital Dentistry. Inside Dentistry. 2014;
13. Christensen G.J. Rapid change in the fabrication of crowns and fixed prostheses. J. Am. Dent. 2014; № 8: 862–864.